When positioning the book box assembly machine,it is necessary to pay attention to multiple key links to ensure that the equipment can complete the assembly task.

Firstly,personnel positioning arrangement.The commissioning personnel should stand in a position that is convenient for observing the operation of the equipment,the actions of each component,and the ability to quickly operate control buttons.It is usually located on one side of the device operation panel,and the assembly area can be clearly seen.This allows for timely adjustment of parameters and intuitive detection of problems that may occur during the assembly process,such as improper folding of cardboard boxes or uneven application of glue.

Next is manual positioning inspection of key parts of the equipment.For the paper box conveyor track,the adjustment personnel need to manually push the paper box to check whether it runs smoothly in the track and whether there is any jamming phenomenon.If there is a lag,it is necessary to adjust the width and levelness of the track to match the size of the paper box.Carefully observe the position of the paper box in the track with the human eye,ensuring that the paper box is always in the center of the track to avoid assembly errors caused by positional deviation.

In the glue application device,the adjustment personnel need to check the relative position between the glue nozzle and the part of the paper box that needs to be applied.By manually controlling the lifting and movement of the glue nozzle,ensure that the glue can be evenly and accurately applied to the corresponding folds of the paper box.You can pre mark the application position on the paper box as a reference to adjust the position of the glue nozzle,ensuring that the glue application position is correct and the amount is appropriate.It will not cause waste and pollution due to excessive amount,nor will it affect the bonding effect due to insufficient amount.

For the folding components of the paper box,the adjustment personnel need to manually simulate the folding action,check the contact position and force between the folding claw and the paper box.Adjust the angle and pressure of the folding claws according to the material and thickness of the paper box,ensuring that the folding action is crisp and clean,the paper box folds neatly,and fits tightly.In this process,the shunting personnel,relying on their experience and familiarity with the equipment,constantly fine tune the position of each part,observe the assembly effect,and repeatedly test until the book box assembly function can stably and accurately complete the assembly work,and produce a book box that meets the quality standards.